Changing A Design | Natalie Ballard | Silhouette UK Blog

silhouette uk blog - natalie ballard - wc3121 - main

Changing A Design | Natalie Ballard | Silhouette UK Blog

Changing A Design

Hello! Natalie here today.

This is my first ever blog for the Silhouette UK Design Team and today we will be talking about stretching your designs and downloads further by changing up how a design is set up within Silhouette Studio.

Importing & Dissecting A Design

I’ve chosen a nice simple butterfly design for this project.

I’m going to do some ink blending and stamping for this project, so simple is better.

Ungroup the design so you can edit the component parts.

Calculations

So, remove the solid butterfly and regroup the top design.

Duplicate this and move the copy to the bottom.

On the original butterfly, ungroup and subtract to punch the holes through your butterfly.

Colour this butterfly black so you can see the calculation has been done correctly.

Colouring The Pieces

Duplicate and break apart a copy of the bottom butterfly.

Colour your sections according to the different material you want to use.

Grouping By Colour

Using select by colour, pick each colour and group.

Move each group to its individual sections of the mat.

This will help you to measure and layout your materials onto your mat so you can cut in one pass.

Cut | Save | Export

Once you are happy with the layout, you can send the design to be cut on your machine or save/export it for future use.

Use your grid lines to help you measure and layout your materials.

Preparing Your Materials

Using a smooth cardstock measuring 6×12, blend three shades of Distress Oxide across the top half of the cardstock to create an ombre effect.

Blend this with a blending sponge to soften the streaks.

On a smaller piece stamp small images for some of the insert sections of the wings.

Once the ombre panel has dried, laminate the section with clear vinyl.

Assembling The Butterfly

Cut out your pieces as laid out by trimming your card to match your mat layout.

Apply your blended and stamped pieces first and infill with ombre glitter card.

Use the lighter section of the card for one group and the darker colour for the other.

Adding A Sentiment

Type your chosen sentiment in a fine decorative font.

We’ll be cutting this layer from vinyl.

Then add two offsets; these will hold the word together if there are any gaps.

These two layers will be cut from the two ends of the ombre glitter card to create contrast between the layers.

Cut and assemble this and adhere to the card with foam pads or tape.

I love swapping up designs like this and making them fit new projects and techniques.

Now you need to pick a design from your stash and try this technique out on it too.

I would love to see what you make.

– Natalie Ballard – 

Silhouette UK Blog Created By Natalie Ballard

Silhouette Products Used

Silhouette Designs Used

Design Used: Butterfly
Design Store Artist: Wispy Willow Designs
Design Store ID: 345189 > Download

Share On Social Media

Sign up for the newsletter

CraftStore Direct is brought to you by the UK’s OFFICIAL supplier for Silhouette, Brother ScanNCut products and Colour+Shape, Graphtec GB Ltd. When you purchase from CraftStore Direct you are buying piece of mind that you will be fully supported with your products for years to come as we manage all warranty and technical support requirements throughout the United Kingdom and Ireland. Read More...

Categories

Tags: Natalie Ballard - Silhouette UK Design Team, Projects By Date, Silhouette UK Design Team

More Similar Posts